Watt IEC, Techtop NEMA and RR USA Hydraulic motors
 


IEC, NEMA & Hydraulic Motors

Aurora Motors, Inc. Vertical Mount Hollow Shaft Motors

Aurora Motors, Inc.

Vertical Mount Hollow Shaft Motors
Vertical Hollow Shaft Motors are designed primarily for deep well turbine pump applications. These motors are high efficiency, high starting torque, quiet running, low vibration and low temperature rise. They are relied upon to give long and trouble free service under arduous conditions with minimum maintenance.

Specs:

  • Cast Iron, 4 pole, 60Hz
  • Power: 10 to 500 HP
  • 208-230/460/575 Volts
  • Frames 215TP up to 5006PH

Click here for additional information and CAD drawings.


Techtop NEMA Motors

TTI NEMA Motors

TTI has delivered a complete line of motors, generators and pumps for over 20 years. Techtop products are tested and approved quality and safety agencies ensuring that every Techtop product will provide trouble free service for the long haul.

Single Phase Specs:

  • Power: 1/3 to 10 Hp
  • 115/208 - 230 VAC
  • TEFC and ODP
  • Cap Start Cap Run
  • Rolled Steel
  • Frames 48 thru 213T

Three Phase Specs:

  • Power: 1 to 200 HP
  • 208-230/460 Volts,
  • Frames 143T thru 447T
  • High Efficiency EPAct Compliant, Cast Iron TEFC
  • NEMA Premium Alum up to 215T, Cast Iron 254T Up, TEFC
  • Severe Duty, Cast Iron, TEFC
  • Close Coupled Pump, JP and JM TEFC
  • Quarry Duty "Crusher Duty " Design "C", Cast Iron, TEFC
  • Oil Well Pump High Slip Design "D"

Click here for more specs


CEG 3 Phase High Efficiency Motor

CEG 3 Phase High Efficiency IEC Motors

TYPE MTEPS

  • CSA APPROVED
  • UL APPROVED
  • ISO 9001 REGISTERED
  • EFFICIENCY VERIFIED
  • 230/460 V OR 575V
  • 3PH -60 HZ - IP55
  • Removable Feet
  • Multi-mount design
  • Service Factor 1.15 suitable for use at 380V. 50HZ 1.0 Service Factor
  • Special HP Rating in smaller frame (Service factor 1.0 - efficiency at 3/4 load)
  • 90 to 180 L Frames

2 POLES - 3600 RPM
4 POLES - 1800 RPM
6 POLES - 1200RPM

Click here for more specs


CEG 3 Phase Motors

CEG 3 Phase IEC Motors

TYPE MTOML

  • CSA APPROVED
  • UL APPROVED
  • ISO 9001 REGISTERED
  • 230/460 V OR 575V
  • 3PH -60 HZ - IP55
  • Removable Feet
  • Multi-mount design
  • Service Factor 1.15 suitable for use at 380V.
    50HZ 1.0 Service Factor

2 POLES - 3600 RPM
4 POLES - 1800 RPM
6 POLES - 1200RPM
8 POLES - 900 RPM

Click here for more specs


CEG Two Speed Motors

CEG Two Speed IEC Motors

TYPE DPOML

  • CSA APPROVED
  • UL APPROVED
  • ISO 9001 REGISTERED
  • IEC
  • Service Factor 1.15
  • 230 V OR 575V OR 460 V
  • 3PH - 60 HZ - TEFC - Class - IP55
  • Removable Feet
  • Multi-mount design
  • Special Rating Available

2/4 POLES - 3600/1800 RPM ONE WINDING - CONSTANT TORQUE
4/8 POLES - 1800/900 RPM ONE WINDING - CONSTANT TORQUE
2/8 POLES - 3600/900 RPM TWO WINDINGS
4/6 POLES - 1800/1200 RPM TWO WINDINGS
2/6 POLES - 3600/1200 RPM TWO WINDINGS
6/8 POLES - 1200/900 RPM TWO WINDINGS

Click here for more specs


CEG Brake Motors & 2 Speed Brake Motor

CEG Brake IEC Motors & 2 Speed Brake IEC Motors

CEG can supply motors with three different types of brake, to be chosen
according to the application:

  1. FPC type: gradual electromagnetic brake powered by direct current,
    with a single braking surface
  2. FHC type: electromagnetic brake with high torque powered by direct current, with double braking surface
  3. FHA type: electromagnetic brake with high torque powered by alternative current, with double braking surface

Watt IEC Motors

Watt IEC Motors

Inverter duty, multi volts/hertz designs for worldwide capacity and asynchronous servo motors for precise control applications.

Specs:

  • Power: 1/8 to 150 Hp
  • Three (3) Phase, World Wide Voltage 190 - 690 50/60 Hz
  • Frame 63 to 160 Aluminum 180 to 250 Cast Iron
  • IP54 to IP67
  • Brake Motors also available

Click here for more specs and CAD drawings


 
 
Home | Products | Applications | Manufacturers | Affiliations | Contact Us
  © Copyright Crump & Associates. All Rights Reserved. Website design by LiquidMedia 360°